DCH3034N1
Notes
- 1000:1 Feedback Voltage Divider (Matched for 10MΩ)
- Zero to Full Output
- Short-Circuit Protection
- Rugged, Encapsulated Module
- Low EMI Sine-Wave Topology
- Noryl Enclosure
- Low Ripple
- Mounting Flange
Specification
| DESCRIPTION | specification | conditions | VALUE |
|---|---|---|---|
| Input Type | DC | ||
| Input Voltage | VI | 12 V | |
| Maximum Input Power | PI | 2 W | |
| Maximum Output Voltage | VO | -30000 V | |
| Voltage Range Controlled | Control Range | 0 - 100 % VO | |
| Control Type | Proportional | ||
| Maximum Output Power | PO | 1.2 W | |
| Maximum Output Current - Primary | IOP | 40 µA | |
| Voltage Regulation | Volt Reg | At Dynamic Load | 18 % VDC |
| Ripple (Volts Peak to Peak) | Ripple | At Full Load, Nominal Input | < 1 % VPP |
| Stability | Stability | Over 8 hours, after 30 minute warm-up. At 25 °C ambient, fixed load, and fixed input. | < 0.2 % VDC |
| Operational Temperature Range | OP TEMP | 0 to 60 °C | |
| Temperature Coefficient | TCOEFF | 0.3 % / °C | |
| Storage Temperature Range | STG TEMP | -40 to 85 °C | |
| Operational Humidity | Humidity | Non Condensing | 0 to 95 % |
| Operating Altitude | Altitude | 0 to 10000 Ft |