UMR-HPC-4000P-250

Typically, convection cooled. Units operating at full power might require additional cooling to maintain case temperature below 65°C. Damage to the power supply may occur if not appropriately cooled during use. For specification differences and additional information on V05/V10 options see data sheet.

DESCRIPTION	specification	conditions	VALUE
Operational Humidity	Humidity	Non Condensing	0 to 95 %
Operating Altitude	Altitude		Sea Level to Vacuum
Storage Temperature Range	STORAGE TEMP		°C
Input Voltage	VI	Nominal	24 V
Input Voltage	VI	Full Output Power	23 - 30 V
Input Voltage	VI	Derated Output Power	10 - 32 V
Maximum Input Current	II	Standby / Output Disable	90 mA
Maximum Input Current	II	No Load, Max Vout	500 mA
Maximum Input Current	II	Max Load, Max Vout	6300 mA
Maximum Input AC Ripple Current	IACR	Nominal Input, Full Load	200 mA PP
Maximum Output Voltage	VO		4000 V
Maximum Output Power	PO		250 W
Maximum Output Current	IO		62 mA
Ripple	Ripple (HF)	1 Hz to 1 MHz (Full Load, Nominal Input)	1.000 % VPP
Output Capacitance	CO		0.10 µF
Current Monitor Scaling	IMON		52 mA / V
Voltage Monitor Scaling	VMON	Into 10 Megaohm Meter, ±2%	100:1 V
Operational Temperature Range	Op Temp Case	Case Temperature at Full Load	-40 to 65 °C
Temp Coefficient	TCOEFF		50 PPM / °C
Case Dimensions	Case Dimensions	Metric	203.2 L x 114.3 W x 27.0 H mm
Weight	Weight	Metric	1164 g
Thermal Shock	Thermal Shock	Mil-Std 810, Method 503-4, Proc. II	-40 to 65 °C
Shock	Shock	Mil-Std 810, Method 516.5, Proc. IV	20 G
Vibration	Vibration	Mil-Std 810, Method 514.5, Fig. 514.5C-3	10 G