SPS-24-250N-4

Features

  • Adjustable Output
  • ARC/Short Protected
  • Configuration Application (Download)
  • Current Monitor
  • Encapsulated
  • Full Digital Controls
  • Low Ripple
  • Non-Metallic Case
  • Patented Technology (More Info)
  • Regulated
  • Voltage Monitor
Capacitor Charging Detectors Dielectric Testing Electrostatic Air Cleaners Electrostatic Oil Cleaners Electrostatic Painting ESD Testing High Voltage Bias Ion Beams Ionizers Leakage Testing Particle Analyzer Photomultipliers Piezoelectric Driver Powder Coating UltraSonics
Specification Conditions Value
VI Nominal 24 V
VI Full Output Power 23 - 31 V
VI Derated Output Power 12 - 32 V
II Standby / Output Disable 60 mA
II No Load, Max Eout 70 mA
II Max Load, Max Eout 275 mA
IACR Nominal Input, Full Load 30 mA PP
VO -250 V
PO 4 W
IO 16 mA
Ripple (LF) 1 Hz to 1 kHz (Full Load, Nominal Input) 0.145 % VPP
Ripple (HF) 1 kHz to 1 MHz (Full Load, Nominal Input) 0.015 % VPP
CO 1 µF
Load Reg. - D 1/2 to Full Load, Max Eout per 0.1 mA 1 % VDC
Load Reg. - S No Load to Full Load, Max Eout < 0.08 % VDC
Line Reg. Nominal Input, Max Eout, Full Power < 0.01 % VDC
Stability Over 8 hours, after 30 minute warm-up. At 25 °C ambient, fixed load, and fixed input. 0.01 % VDC
Stability Over 24 hours, after 30 minute warm-up. At 25 °C ambient, fixed load, and fixed input. 0.02 % VDC
RAL 22 Ω
IMON Full Scale Signal - 5 V Reference Option 12 mA / V
IMON Full Scale Signal - 10 V Reference Option 24 mA / V
VMON Full Scale Signal - 5 V Reference Option 50 V / V
VMON Full Scale Signal - 10 V Reference Option 25 V / V
Op. Temp. Full Load -40 to 60 °C
Op. Temp. Case Case Temperature at Full Load -40 to 80 °C
TCOEFF 50 ppm / °C
Store Temp. -55 to 105 °C
Humidity Non Condensing 0 to 95 %
Altitude Sea Level to Vacuum
Case Dimensions Metric 68.33 W x 30.85 H x 81.15 D mm
Weight Metric 400 g
Title / Description
3D Model for SPS Series Digital High Voltage Power Supplies
Quick Start Guide for SPS Series Digital High Voltage Power Supplies
User Settable Parameter Configuration Options for SPS Series Digital High Voltage Power Supplies
  • Append -5 or -10 for 5 or 10 volt scale for controls and monitors followed by L (default enable) or H (default disable).
  • Other hardware options available, see datasheet for details.
  • IMON for 10 V reference option, at maximum output current will read 1.33V on 4W models, 6.67V on 20W models, and 10.0V on 30W models. Half for 5V reference options.
CE RoHS rUL